Description

Automatic Transfer Switches (ATS). An ATS is a device that interfaces with a generator and the building's electrical system. It monitors the utility power and signals the generator to start if the utility power goes out of spec or drops out entirely (blackout). Backup power is now fed to the main utility panel or an emergency panel via the ATS.Automatic Mains Failre(AMF) detection with genset automatic starting-up/shut down,atuomatic load control(need ATS),automatic crank disconnecting,parameters display,monitoring,and protections.

ATS&AMF Features

★ Automatically controls the diesel to start and stop.

★ The controller provides the following analogue channels: three phases/wire generator voltage, three-phase load current, battery voltage, coolant temperature, oil pressure, generator speed, generator frequency, charge voltage, total run time.

★ The controller accepts four digital inputs: remote start, high coolant temperature, two configurable inputs.

★ Relay outputs are provided for LCD1, LCD2, LCD3, LCD4, three configurable outputs.

★ Custom digital inputs and relay outputs.

★ Automatically shuts down the diesel on fault condition.

★ Multiple diesel alarm channels are provided to monitor the following: under/over generator voltage，load current overload，under/over generator frequency、low oil pressure、high coolant temperature、over speed、charge failure, low battery voltage、emergency stop、fail to start.

★ Multicolor and graphical icon LCD display.

★ Competitive price.