Product Center
YILONG super silent soundproof generating set, include engine, alternator, base frame, connecting flange, fuel tank, and control system,etc.. It is applicable for using in many places, such as telecom,bank, uptown, airport where pollution are prohibited
“Life moves on even when the power down…”
Extreme weather, construction, and many other unforeseen complications can interrupt the electrical service which you and your family depend on to continue your daily activities. With a YILONG HOME standby power system, life goes on even when the power goes out. When electricity is lost—day or night—you can be assured that your home will have all the comfort and convenience you depend on.
Unique & Compact Structure
The generator set has a compact and unique design. The exhaust is ducted out the top cover facilitating installation. The layout of the oil and coolant inlet has been redesigned to permit easier access for service.
Low noise operation
The YILONG super silent generator series offer unparalleled low noise levels. YILONG employs a unique double air inlet and outlet design. The generator is equipped with a built-in large sound attenuating muffler and additional sound insulation liners to limit noise.
Digital control panel
The digital control panel makes operating and maintaining the set easier and safer. Real-time data such as amperage, voltage, and frequency levels give immediate information to the operator. Additionally, warning lamps immediately alert the operator of any extraordinary running condition.
High quality power output
The improved AVR (Automatic Voltage Regulator) limits voltage fluctuation to a very low level ensuring a smooth and steady output. Additionally, the AVR features built-in overload protection and will automatically shut off the output at 110% of rated load.
Competitive economic advantage
The large capacity fuel tank provides extended running time. The high efficiency combustion system is designed to reduce fuel consumption and operating costs.
ATS (Automatic Transfer Switch)
The ATS continually monitors utility power and if voltage or frequency fall below acceptable levels. it commands the generator to start automatically and connect generator power to the intended load. Once proper utility power is restored, the ATS stops the generator and reconnects utility power. The ATS has been designed to be installed either inside or outside the generator set.
Controller system
1.Standard control panel, including voltmeter, fequency meter, ampere meter,water temperature gauge, oil temperature gauge, oil pressure gauge, AMF control module,oil level indicator, emergency button,preheating button, battery voltage gauge, hours running counter for protection and tranfering.
2.It can be with ATS electric control cabinet, including circuit breaker, LCD or LED auto controller, indicating lamp, transfer switch,etc.. Automatic transfer switch (ATS) uses update technology, which can be automatic control for on-off electricity, remote monitoring, automatic parallel operation,etc…
Genset Model |
Unit |
YD9 |
YD10 |
YD12 |
YD16 |
YD20 |
YD30 | |||
Standby Rating |
kw |
9 |
11 |
13.2 |
17.6 |
22 |
33 | |||
KVA |
12.1 |
13.8 |
16.5 |
22 |
27.5 |
41 | ||||
Prime Rating |
kw |
8 |
10 |
12 |
16 |
20 |
30 | |||
KVA |
10 |
12.5 |
15 |
20 |
25 |
37.5 | ||||
Controller |
|
ATS |
ATS |
ATS |
ATS |
ATS |
ATS | |||
Engine |
Model |
|
YD380 |
Y385 |
YD480 |
YD485 |
YSD490 |
Y4100 | ||
12h Power |
kw |
10 |
11 |
13.2 |
15 |
21 |
27 | |||
Speed |
rpm |
1500 | ||||||||
Fuel use |
g/kw.h |
247 |
247 |
250.2 |
250.2 |
235 |
23.5 | |||
Closed water cooled/Electric starting | ||||||||||
Alternator |
TFW or STC or Leroy somer or | |||||||||
Rated Output |
kw |
8.6 |
8.6 |
10 |
12 |
16 |
20 | |||
Rated Current |
A |
15.5 |
15.5 |
18.1 |
21.6 |
28.9 |
36.1 | |||
Rated Voltage |
V |
400/230 | ||||||||
Fre |
Hz |
50 | ||||||||
Power Factor |
COSφ |
0.8Lagging | ||||||||
Tech |
3-phase,4-wire,Y type connection, Brushless, Automatic | |||||||||
Net Weight |
kg |
525 |
550 |
600 |
700 |
750 |
800 | |||
Package |
cm |
120*60*110 |
130*65*120 |
150*73*125 | ||||||
Description |
Automatic Transfer Switches (ATS). An ATS is a device that interfaces with a generator and the building's electrical system. It monitors the utility power and signals the generator to start if the utility power goes out of spec or drops out entirely (blackout). Backup power is now fed to the main utility panel or an emergency panel via the ATS.Automatic Mains Failre(AMF) detection with genset automatic starting-up/shut down,atuomatic load control(need ATS),automatic crank disconnecting,parameters display,monitoring,and protections. |
ATS&AMF Features |
★ Automatically controls the diesel to start and stop. |
★ The controller provides the following analogue channels: three phases/wire generator voltage, three-phase load current, battery voltage, coolant temperature, oil pressure, generator speed, generator frequency, charge voltage, total run time. |
★ The controller accepts four digital inputs: remote start, high coolant temperature, two configurable inputs. |
★ Relay outputs are provided for LCD1, LCD2, LCD3, LCD4, three configurable outputs. |
★ Custom digital inputs and relay outputs. |
★ Automatically shuts down the diesel on fault condition. |
★ Multiple diesel alarm channels are provided to monitor the following: under/over generator voltage,load current overload,under/over generator frequency、low oil pressure、high coolant temperature、over speed、charge failure, low battery voltage、emergency stop、fail to start. |
★ Multicolor and graphical icon LCD display. |
★ Competitive price. |